Category: My Cricut Craft Room DT

My Cricut Craft Room April 100 Cartridge Blog Hop

Published on by creativecraftcorner40 Comments

Mccr_100CARTRIDGE_Blog_Hop

Welcome to My Cricut Craft Room’s
100 Cricut Cartridge Blog Hop
You should have started at http://mycricutcraftroom.blogspot.com/  if not please start at the beginning.
Be sure to visit Erica’s Blog http://mycricutcraftroom.blogspot.com tomorrow for over 50 NEW projects that you did not see today….
Also make sure to follow Erica’s blog so you will know when she has contests, prizes,
challenges, swaps & special online coupons.
Currently she is running a Scrapbook & Card challenge over on her challenge blog and you can win a gift certificate to her webstore!  http://ericascraftroomchallenges.blogspot.com/.
Don’t forget to comment along the way on all of the blogs today and tomorrow to be entered to win the Cricut cartridge that Erica is giving away today.
Winners will be announced on her blog on Tuesday!

 

For my projects I decided to use Go Canada!, Birthday Bash, Lacy Labels, and Love You A Latte Cricut Cartridges.

I decided to keep things simple this month as I have had a lot going on.  I made two projects and both are cards.  I used my gypsy to create both projects.

For my first card I used Go Canada! and Birthday Bash.

P1010873

I cut the leaft from the Go Canada! Cartridge at 6.88″.  This image also includes the wording which you see on my card.  To make it easier for me I cut the leaf only and used the hide feature to hide the remainder.  Then I created the same image and hid the leaf.  That way it was easier for me to cut them out of two different colours.  The words “Canada Eh!?” are cut at 5.35″.  The base of the card comes from Birthday Bash Cricut Cartridge and is cut at 3.94″.

P1010875

 As you can see above I put the leaf and the words on dimensionals!

 

For my next card I used Lacy Labels and Love You a Latte cartridges.

P1010855

The tea cup and layers are from Love You A Latte and are cut at 2.06″.  The base of the card is from Lacy Labels and were sized at 4.29″ and the welded together to make a card base.  The next layer is the same shape but cut at 3.82″.

 

 

 

 

Next you should go to Erica’s Projects 

 

Here is the entire lineup in case you get lost….

 

1.  Start    
2.  Susan    
3.  Janet    
4.  Jenn Lorist    
5.  Jenny R    
6.  Liz    
7.  Tracy    
8.  Karey    
9.  Erica’s Projects    
10.  Dana    
11.  Tonya    
12.  Mary    
13.  Sheila    
14.  Kathy S    
15.  Amber    
16.  Laurie    
17.  marji    
18.  Christina    
19.  Kym    
20.  Ava    
21.  Sabrina    
22.  Tiffany    
23.  Teresa    
24.  End  

 

//

Advertisements

My Cricut Craft Room March 100 Cartridge Blog Hop

Published on by creativecraftcorner32 Comments

Welcome to My Cricut Craft Room's 100 Cricut Cartridge Blog Hop

You should have started at http://mycricutcraftroom.blogspot.com/  if not please start at the beginning.

 

Mccr_100CARTRIDGE_Blog_Hop

 

Be sure to visit Erica's Blog http://mycricutcraftroom.blogspot.com tomorrow for over 50 NEW projects that you did not see today.  Also make sure to follow Erica's blog so you will know when she has contests, prizes, challenges, swaps & special online coupons.  Currently she is running a Scrapbook & Card challenge over on her challenge blog and you can win a gift certificate to her webstore!  http://ericascraftroomchallenges.blogspot.com/
This Friday she will announce February's Scrapbook swap. She has a swap each week and you have two weeks to make your project each month. There will be a card, scrapbook, tag, die cut and embellishment swap each month! http://ericascraftroomswaps.blogspot.com/

Don't forget to comment along the way on all of the blogs today and tomorrow to be entered to win the Cricut cartridge that Erica is giving away today.  Winners will be announced on her blog on Tuesday!
If you get a chance please visit Erica's Webstore and enjoy 15% your total purchase this weekend.
Enter the code MARCH during the third step of check out to see the discount.
She has everything crafty…. Cricut cartridges, adhesive, papers, stamps and so much more…..

 

Today I decided to use Nifty Fifties, Go Canada and Life's a Party Cricut Cartridges.

For my first projects I decided to make two different shape cards.  

The first one is made using Life's a Party for the base.  This can be found on page 27 and is cut out with my gypsy at 4.65".  The layers are also cut out at 4.65".  

P1010804

The "Go Team" comes from the Go Canada Cricut Cartridge and is on page 23.  I cut this out at 2.06" and also used the shadow layer to make it pop.

P1010805

 Here's my card….

P1010803

 

For my second project I used the Life's a Party and Nifty Fifties Cricut Cartridges.  The base of my card come from Life's a Party on page 23 and is cut at 4.18".  I used the coordinating layer but hid the image on the layer.  I actually cut two of the layers out.  The first layer is cut at 4.18" and the second layer is cut at 3.94".  The image comes from Nifty Fifties and is cut at 3.94" along with all of the layers.  Here's my card…

P1010806

P1010807

 Your next stop on the hop is Jen L!!!

 

Here's the line up in case you get lost along the way… 

Karey http://www.creativecraftcorner.com <——- YOU ARE HERE!

My Cricut Craft Room – Simply Charmed Cricut Cartridge

Published on by creativecraftcorner12 Comments

Theme day thursday 2012

 

Today's theme….Simply Charmed Cricut Cartridge!!

I love this cartridge.  It has so many cute images on it!

For my card today I decided to use the little chick.

P1010794

The image and the layers are cut out at 2-3/4".  The sentiment comes from Mr. Cricut Crazy's Easter Blessings stamp set.

Until next time…have fun creating!!

Karey

My Cricut Craft Room February 100 Cartridge Blog Hop

Published on by creativecraftcorner39 Comments

 

Welcome to My Cricut Craft Room's
100 Cricut Cartridge Blog Hop
You should have started at http://mycricutcraftroom.blogspot.com/  if not please start at the beginning


Be sure to visit Erica's Blog http://mycricutcraftroom.blogspot.com tomorrow for over 50 NEW projects that you did not see today….

Also make sure to follow Erica's blog so you will know when she has contests, prizes, challenges, swaps & special online coupons.

Currently she is running a Scrapbook & Card challenge over on her challenge blog and you can win a gift certificate to her webstore!  http://ericascraftroomchallenges.blogspot.com/

This Friday she will announce February's Scrapbook swap…. She has a swap each week and you have two weeks to make your project each month. There will be a card, scrapbook, tag, die cut and embellishment swap each month!http://ericascraftroomswaps.blogspot.com/

Don't forget to comment along the way on all of the blogs today and tomorrow to be entered to win the Cricut cartridge or K. Andrew Its Valentine stamp set that Erica is giving away today.

Winners will be announced on her blog on Tuesday!

If you get a chance please visit Erica's Webstore and enjoy 15% your total purchase this weekend.
Enter the code 15 during the third step of check out to see the discount.
She has everything crafty…. Cricut cartridges, adhesive, papers, stamps and so much more…..

 

 

For my project I used the Sports Mania Cricut Cartridge to create my first vinyl project…

P1010782

This project is now on the back of my husband's truck!  The hockey player is cut from the Sports Mania cartridge at 7" on my gypsy.  The lettering and number is from Birthday Bash and is cut at 1.59".  I am loving the way this turned out.  Especially for my first time using vinyl.  

My second project uses the Go Canada Cricut Cartridge and Elegant Edges Cartridge.  I made a card that is 5" x 5".

P1010787

The skate is from Go Canada! and all the layers are cut out at 3.12" on my gypsy.

The circle layer is from Elegant Edges and is cut out at 4.18" on my gypsy.  The sentiment comes from My Creative Time's Sports Sentiments stamp set.

 

Your next stop should be Jen L.

 

If you get lost along the way….here is the line up…..

1.     My Cricut Craft Room http://mycricutcraftroom.blogspot.com

 2.      Heather F  http://www.papercrafteranonymous.com/

4.     Laurie- http://mincedpaper.blogspot.com
13.    Erica’s Projects http://ericasprojects.blogspot.com
14.    Shelly  http://kccroppers.blogspot.com/ 

 

 

Until next time…have fun creating!!

Karey

My Cricut Craft Room – The Letter E

Published on by creativecraftcorner13 Comments

The letter of the day is E

 

As soon as I saw the theme I knew I had to participate!  For those of you that know me or follow my blog you know I love elephants.  Lucky for me, my adorable neice loves elephants too.  She just had her 4th birthday on the weekend so I just had to make her an elephant card.

P1010779

And here's the inside….

P1010780

The elephant is from the Sugar and Spice Cricut Lite Cartridge and is cut out at 2.53" on my gypsy.

My daughter was looking at the layout and thought I should try something different.  She came up with the idea to punch a circle out of the layer piece so that the sentiment would show through.  The sentiment on the front of the card and the inside are from My Creative Time's Wow, So Many Candles stamp set.

Make sure to stop by My Cricut Craft Room to see what the other Design Team Members have created today!!

Until next next time…have fun creating!!

Karey

My Cricut Craft Room – Get Well Card

Published on by creativecraftcorner11 Comments

Today over at My Cricut Craft Room we could make a get well card or use embossing powders on our card.  I chose to make a Get Well Card.

I decided to make an A2 size card portrait style.  I used the Indie Art cartridge and cut the bandaid at 2.76" on my gypsy.  The center I put on a dimensional.  The little heart is also on a dimensional.  I used a small heart punch but you could easily find a heart on a cricut cartridge and cut it out.  The sentiment comes from My Creative Time's Pain Pain Go Away stamp set.  The clear buttons and punches to match are from Stampin' Up.  I was asking my daughter about the buttons and different choices when I came across my stash of the clear button from Stampin' Up.  I punched out the three shapes and laid the buttons over the shapes and asked my daughter her opinion.  Without a blink of an eye she said…."why don't you use the "x's" but take the one out of the middle and make it an "o" for hugs and kisses since you have a bandaid".  How cute was that!!!!  So….onto the project…..

P1010772

P1010773

So what do you think???  Cute idea eh?

Make sure to stop by My Cricut Craft Room and see what the other Design Team members have made today!

Until next time…have fun creating!!

Karey

My Cricut Craft Room – Art Philosophy

Published on by creativecraftcorner16 Comments

Today on My Cricut Craft Room the Design Team had a choice between creating a project with the Art Philosophy Cricut Cartridge and creating a project with a Theme- Valentines Die cuts.  I decided to try my hand at the Art Philosophy Cartridge since I got it for Christmas and have not had a chance to play with it yet.

For my project I decided to make door hangers.  The cut is on page 25 under the Font Layer.  I used a 12 x 12 piece of Chocolate Chip cardstock and used the fit to page feature on my Cricut Expression.

P1010763

P1010764

Here are some close ups….

P1010766

 
P1010765

I also used My Creative Time's Build a Banner Kit and Anyday Bingo & Crossword stamp set.

Make sure you stop by My Cricut Craft Room to see what the other Design Team members have created!!

Until next time…have fun creating!!

Karey